Steel Ball

A complete honing solutions under one roof

Request a Quote

Steel Ball

Precision Steel Ball Used In Mechanical Assemblies

Advancements

Manufacturers are continually pushing the envelope in regard to what can be accomplished with the single pass Honing Process. Improved tool, fixture and machine designs have allowed for increased production rates as well as improved bore precision. The following are some of the latest advancements that have been made.

Through Bore

The key to the single pass Process is to allow the diamond tooling to follow the existing centerline of the bore to be finished with as little pressure as possible. This is normally done by allowing the part to float along with the fixture to achieve the bore sizes and geometry.

Case History : 2

Data table: Material, SAE 52100, Hardness, 62-67 HRC
MaterialSAE 52100Hardness62-67 HRC
Bore TypeThrough BoreStock Removal0.080 mm
I/P SizeØ8.93(+0.012)Length26 mm
Tool 1Ø8.950GritBV
Tool 2Ø8.965GritBV
Tool 3Ø8.980GritBV
Tool 4Ø8.995GritBS
Tool 5Ø9.005GritBS
Tool 6Ø9.010GritBR
Data table: BORE DIMENSIONS, REQUIRED, ACHIEVED
BORE DIMENSIONSREQUIREDACHIEVED
SizeØ9(+0.005/+0.014)Ø9.010/9.011
Taper0.003 mm0.001 mm
Ovality0.002 mm0.001 mm
Surface Finish0.4 Ra0.23 Ra
Data table: Machine Type, AB 608 (8-Spindle 6-Station)
Machine TypeAB 608 (8-Spindle 6-Station)
Cycle Time20 Sec/Component
Production180 Nos / Hour

Let's start creatingtogether

Phone